Groz K5-8Mr Hss Knurl 5/8in (D) x 5/16in (W) x 7/32in Hole Shop Presses 0-150mm Screwdriver MD940N: PH0-75 Screwdriver

0-150mm Screwdriver MD940N: PH0-75 Screwdriver MD947N1: PH1-75 Screwdriver MD948N1: PH2-100 Screwdriver MD961N: PZ1-75 Screwdriver MD962N: PZ2-100

- High strength 3-ply nylon stitching secures connecting ends

- 450mm (18 inch)

Working Pressure: 15kgf/cm²Maximum Pressure: 20kgf/cm²Hose Size: 5/16 (8mm)

- 59 Pieces Part # Size Pack Qty 4502 3/16 Nuts (Solder-On) 2 4503 1/4 Nuts (Solder-On) 4 4504 5/16 Nuts (Solder-On) 4 4505 3/8 Nuts (Solder-On) 2 P301 3/16 x 1/8 Male Barbs 2 P302 1/4 x 1/8 Male Barbs 4 P303 5/16 x 1/8 Male Barbs 4 P305 3/8 x 1/4 Male Barbs 2 P501 3/16 x 3/16 Nut & Tail 3 P503 1/4 x 1/8 Nut & Tail 4 P505 5/16 x 5/16 Nut & Tail 4 P506 3/8 x 3/8 Nut & Tail 3 P601 3/16 x 1/8 M/Elbow 90° 2 P602 1/4 x 1/8 M/Elbow 90° 3 P603 5/16 x 1/8 M/Elbow 90° 3 P605 3/8 x 1/4 M/Elbow 90° 2 P701 3/16 Hose Joiners 2 P702 1/4 Hose Joiners 3 P703 5/16 Hose Joiners 4 P704 3/8 Hose Joiners 2

Groz K5-8Mr Hss Knurl 5/8in (D) x 5/16in (W) x 7/32in Hole Shop Presses 0-150mm Screwdriver MD940N: PH0-75 ScrewdriverGZ12801 GROZ K5 8MR HSS KNURL 5 8IN (D) X 5 16IN (W) X7 32IN HOLE HSS Knurls Manufactured from High Speed Steel. Fully hardened to over 60 HRC. Knurls have perfectly formed short teeth. Faces are chamfered on both sides to produce burr freework of uniform precision. Left hand knurling is produced by right hand knurls andright hand knurling is produced by left hand knurls. Diamondknurling is produced by using right and left hand knurls inpairs. Knurl